The Sea Hawk 36
Base Cabin Model
Standard Equipment and Specification List

Specifications

LOA: 38”- 2” (Including bow pulpit and dive platform)
Beam: 14'
Draft: 30” twin engine, 36” single engine
Weight: 12,000 lbs. approx.

Construction

• Hull: Solid 100% hand laid fiberglass w/ vinylester resin barrier coat, complete w/ main and two (2) secondary fiberglass composite bulkheads. Full length fiberglass composite stringers.
• Cap: Fiberglass cuddy cap, foredeck, bow pulpit and molded non-skid walk-around gunwales. Cap is secured to hull w/ s.s. fasteners @ 8” o/c. and 3M 5200 adhesive, then bonded with fiberglass. Continuous rigid PVC rub rail.
• Cuddy cabin: Companionway door and hatch w/ steps leads to a roomy stand up cuddy cabin. Cabin has a “V” berth w/ storage below, rope locker, and a separate enclosed head w/ manual marine toilet & 13 gallon holding tank. Head has a locking door.
• Main Cabin: Molded fiberglass composite construction, 13’- 5” x 11’ main cabin w/ 6’- 4” head clearance, aluminum center opening three section front windshield and sliding aluminum side windows (tinted). Main cabin is open to cockpit in standard configuration.

Decks

• Honeycomb/fiberglass composite decks (no plywood and no raised engine boxes).
• All molded decks w/ non-skid finish.
• Self bailing decks.
• Flush hatches.
• All deck hatches have integral gutters w/ drains.

Fuel Tanks

• Two (2) fiberglass 150 gallon vented diesel fuel tanks w/ shut offs. (U.S.C.G. Certified boats have aluminum tanks.)
• Tanks are molded to fit hull contour and are bonded in place.

Motor

• Yanmar 6LPA-STP 315h.p. fresh water cooled diesel marine engine w/ Hurth/ZF gears.
• Racor fuel filter.
• Bronze raw water intake strainer.
• Metal engine mounts thru-bolted to stringers.
• Fiberglass exhaust system.
(Note: This is the base model engine. In the event an optional engine or engines are selected, the relevant systems will be sized as required or recommended for that specific engine configuration.

Underwater Gear

• 1-3/4” A19 stainless steel shaft. (Shaft size varies w/ engine horsepower)
• Fiberglass shaft log.
• Bronze shaft packing box.
• Bronze strut.
• Bronze rudder, rudder port, and tiller arm.
• Bronze 3-blade prop.
• Bronze external scoop strainer.
• All thru hulls below water line are bronze w/ full flow ball valves.

Helm Station

• Padded helm seat on pedestal
• Fiberglass console.
• Hydraulic steering assembly.
• Stainless steel “destroyer” wheel.
• Twin lever engine control.
• High speed compass.
• Engine instrument panel.
• Fuel gauges.

Electrical

• 12-Volt electrical system.
• 5 circuit fused switch panel.
• Two (2) 4D batteries.
• Battery selector switch.
• Halogen dome lights in cabin, cuddy and head.
• Navigational lighting.

Miscellaneous

• Bow rail (half length).
• Two (2) 10’ cabin top handrails.
• Anti-fouling bottom paint, (2 coats) w/ boot stripe.
• Complete electrical bonding system w/ zincs on hull, rudder and shaft.
• Five (5) 10” heavy-duty stainless steel cleats.
• Automatic bilge pump.

Note: This is the base cabin model boat package. Many different engine, style and equipment options are available. Please contact us for full price and options list. Specifications subject to change without notice.

Phone: (863) 385-1995     Fax: (863) 385-7175     Email:  info@SeaHawkBoats.com